ASTROCAB PVC Pipe Bender SPRING 25 mm Tapered STEEL Flexible Bending Spring Lever Tool(63 cm)

About this product

Internal springs ( PVC Pipe Bending Springs) are just a spring made from flattened steel with a taper at one end (which is inserted into the pipe) while the other end incorporates an eye. With the spring within the pipe is prevented from collapsing inwards as it is bent. A specific spring is required for each size of pipe being bent.Before you start, tie a length of cord to eye on the end of the spring, this will allow the spring to be removed from the pipe.Insert the spring into the pipe so that it is positioned evenly across the area of the required bend. If the spring is a light fit in the pipe, rotate the spring anticlockwise as is it inserted - this will cause the spring to `wind-up' so that it will have a slightly smaller overall diameter. If the pipe has been cut before bending, the end of may have become slightly reduced, don't try to force the spring, but carefully remove the burr so that the spring will freely enter.With the spring correctly positioned, the usually method with pipe is to place the center of the bend across the knee and slowly pull both ends to form the band. Slightly over bend the pipe, then reverse the pipe from the spring and make it easier to remove the spring.When happy with the bend, remove the spring from pipe, using the cord and/or rotating the spring anticlockwise as it is withdrawn if necessary. • 25mm PIPE Bend Spring • Premium Heavy Duty • PVC Bending SPRING • Long Lasting